When PVC coated flexible metal conduit is used, wire and cable will be inserted into the pipe first, then the corresponding type joint can be matched. In order to ensure the best performance of the plastic metal hose when used, there are strict requirements for installation. The specific requirements are as follows:
1, the bending radius should not be less than 6 times the outer diameter of the hose.
2, the fixed point spacing should be not greater than LM pipe and terminal elbow point distance should be 300mm.
3. The plastic metal hose which is connected with the embedded lamps or similar appliances, the fixed pipe card at the end of the flexible pipe should be installed at the LM of the length of the hose from the edge of the lamp and the appliance.
Through the above introduction, we hope that customers and friends can understand the flexible metal conduit , so as to facilitate the smoother purchase and use of products, and more comprehensive understanding of metal hose joint products. Welcome to visit our company for advice.
Tel: 86-571-82151572
Fax: 86-571-56059920
Mobile: 86-15988402508
E-mail: sharon@topele.com
