With the increasingly widespread application of flexible metal conduit fittings, it plays an increasingly prominent role in the production of some enterprises.
(1) Male connector: It is mainly used for the local connection box and hose connection. Place the hole in the box, insert the joint, and fix it with the lock mother.
(2) Female connector: It is mainly used for threaded connection between cable tube and hose.
(3) Card sleeve type connector: It is mainly used for the connection of metal hose and steel pipe. The fitting of the card sleeve connector does not have to be set on the steel pipe. The connector is at the end of the steel pipe, and the card is fastened, which is easy to install.
(4) Plug-in connector: It is mainly used for the embedded pipe with small intensive clearance and the inside diameter of the inserted steel pipe. It is easy to install.
(5) Reducing connector: It is mainly used in the case of inconsistency between the diameter of steel pipe and metal hose, and can be arbitrarily increased and decreased according to the requirements of on-site installation.
Through the above introduction, we hope that customers and friends can understand the flexible metal conduit fittings, so as to facilitate the smoother purchase and use of products, and more comprehensive understanding of metal hose joint products. Welcome to visit our company for advice.
Tel: 86-571-82151572
Fax: 86-571-56059920
Mobile: 86-15988402508
E-mail: sharon@topele.com
